Garnet crusher is a kind of ultrafine powder processing for non-flammable and explosive brittle materials with medium to low hardness, Moh's hardness ≤ 6, such as: calcite, chalk, limestone, dolomite, carbon black, kaolin, bentonite, talc, mica, magnesite, illite, chlorite, vermiculite, seafoam, agglomerate, accretionary, cummin, diatomaceous earth, barite, gypsum, alumina, graphite, fluorspar, phosphorite, potash, pumice, pumice etc. More than 100 kinds of materials, the product size can be adjusted from 325 to 3000 mesh, and the daily output can range from 325 to 7000 tons. , pumice, pumice and more than 100 kinds of materials, the product particle size can be adjusted in the range of 325~3000 mesh, and the daily output ranges from 0.7~7.5 tons. Garnet is a kind of natural mineral minerals, it is a kind of natural mineral minerals.
Garnet
Working Principle of Garnet Grinding Machine:
When working, the main motor drives the main shaft and the turntable to rotate through the deceleration device, and the roller pins on the outer edge of the turntable make the dozens of rollers on the grinding ring for rolling of the rollers. The large material is crushed into fine particles by the hammer crusher, and then it enters the storage bin through the elevator, and then through the oscillating feeder and the inclined feeding pipeline, the material is uniformly transported to the scattering disk above the turntable. Under the influence of centrifugal force, the material is dispersed in the circumferential direction and enters the rollers of the grinding ring, which is impacted, crushed and ground by the ring rollers, and then becomes powder after being processed by the three ring passages, while the high-pressure blower makes use of its suction effect to suck the outside air into the machine, and feeds the crushed material into the powder separator. In the powder separator, the rotating impeller presses the coarse material back to be regrinded, and the fine powder that reaches the standard will enter the cyclone collector with the airflow, and then discharged by the discharging valve in its lower part, which is the final product. And the airflow containing a small amount of fine dust will be purified in the pulse dust collector, and then discharged by the fan and muffler.
If you are interested in our products please call us at 0086-371-67997088 or click Business Link Online We will be online 24 hours a day, welcome to call. Our customer service staff will provide you with detailed answers, thoughtful service, will be happy to provide you with product information and application knowledge, so that you can not only get valuable equipment, but also get our attentive service.
